819C-SL-3.3-CAL, Integrating Sphere Detector, Collimated Beam, 3.3 in., 400-1100 nm

Thương hiệu: Newport

Mã SP: 819C-SL-3.3-CAL

Liên hệ

Integrating Sphere Detector, Collimated Beam, 3.3 in., 400-1100 nm MODEL: 819C-SL-3.3-CAL

Quả cầu tích phân

Hotline hỗ trợ 24/7: 0963653625

Số lượng

Overview

The 819C-SL-3.3-CAL is a NIST traceable calibrated integrating sphere detector using a 3.3 inch integrating sphere with a high performance silicon photodetector. The input port size is 1.0 in. diameter and the wavelength range is 400 – 1100 nm. It comes with an SMA fiber optic connector on the North pole as a standard feature allowing a small amount of light pickoff for wavelength measurement or any further analysis without affecting the overall system calibration. Note that the system calibration is no longer valid if any component is changed from the original calibrated configuration. For a very high power level, elevated temperature of the integrating sphere system can affect the measurement accuracy so the sphere must be temperature controlled. Calibration is done only with no attenuator on the photodiode. If you have a legacy optical power meter that requires an 8-pin DIN calibration module, order 819C-SL-3.3-CAL/CM.

Technical Specs

Detector Type

Collimated Beam Integrating Sphere
Detector Input

Free Space
Detector Material

Silicon
Spectral Range

400 - 1100 nm
Sensor Size

Ø11.3 mm
Attenuator

None
Maximum Measurable Power

170 mW
Minimum Measurable Power

100 nW
Maximum Measurable Power Benchtop Meter

0.17 W

Maximum Measurable Power Handheld Meter

0.09 W
Power Range

100 nW - 170 mW
Calibration Uncertainty without Attenuator

±1.5% @ 400-550 nm
±1% @ 551-950 nm
±1.5% @ 951-1010 nm
±3% @ 1011-1100 nm
Sphere Size

3.3 in.
Sphere Material

PTFE
Input Port Size

1.0 in.
Connector Type

DB15